TECHNICAL SPECIFICATIONS
HARDWARE INFORMATION
Processor
Atheros AR7240（400 MHz） Network Processor
General Usage
CPE
System Memory
32MB（max 64MB optional）DDR SDRAM
NOR Flash
8MB（max 16MB optional）
PCIe Slot
1 x 9.2 mm Mini PCIe slot
Ethernet
2 X 10/100 Base-T Ethernet Port（with Auto MDI / MDIX）
Serial Port
1 x 4pin header（TTL）
Reset
Push Button Reset
Remote hardware reset（Optional）
Watch Dog Timer
Yes
PoE
Passive PoE （range 9V-28V DC）
DC Jack Input (optional)
Range 5V-28V DC
Power Consumption
3W (Host Board only)
RoHS Compliance
Humidity
Operating: 5% to 95%（non-condensing）Storage: Max.90% （non-condensing）
Temperature Range
Operating: -20ºC to 70ºC Storage: -40ºC to 90ºC
Dimensions
115 x 70 x 16（mm）
Weight
100g
APPLICATION
RF MODULE
802.11 WLAN
Atheros AR9281，b/g/n ，150Mbps（100mW）
Atheros AR9285，b/g/n ，150Mbps（400mW）
Atheros AR9283，b/g/n ，150&300Mbps（200mW）
Atheros AR9287，b/g/n ，150&300Mbps（200mW）
Atheros AR9280，a/b/g/n ，150&300Mbps（200mW）
SOFTWARE INFORMATION
Firmware Support
Redwave，OpenWRT，DD-WRT
① The input power can come from an Ethernet port and it is fed to the other Ethernet port so that it can in turn drive another Passive PoE device.
② Serial Converter available to change the TTL signals on board to RS232 signals for debugging Configurations are subject to change without notice.
③ Please contact Redwave sales representatives for other available configurations.
